CentOS 7.1编译安装Nginx1.9.0


1 依赖库配置,编译和安装Nginx1.9.0

先创建一个名为nginx且没有登录权限的用户和一个名为nginx的用户组,然后安装nginx所需的依赖库和依赖包,最后通过.configure进行安装的详细配置。另外,补录一个pcre的tar包备份地址:https://dn-vfhky.qbox.me/libs/nginx/pcre-8.36.tar.gz,以及一个zlib的tar包备份地址:https://dn-vfhky.qbox.me/libs/nginx/zlib-1.2.8.tar.gz。

#######新建nginx用户和nginx组
[root@typecodes ~]# groupadd -r nginx && useradd -r -g nginx -s /bin/false -M nginx
#######yum安装nginx必须的依赖库
[root@typecodes ~]# yum -y install openssl openssl-devel libxml2-devel libxslt-devel perl-devel perl-ExtUtils-Embed

#######官网下载Nginx1.9.0的tar包,然后解压到服务器上
[root@typecodes ~]# wget -c http://nginx.org/download/nginx-1.9.0.tar.gz
[root@typecodes ~]# tar -zxf nginx-1.9.0.tar.gz && cd nginx-1.9.0

#######下载pcre的tar包并解压,以便支持Nginx的Rewrite功能
[root@typecodes nginx-1.9.0]# wget -c http://git.typecodes.com/libs/php/pcre-8.36.tar.gz && tar -zxf pcre-8.36.tar.gz
#######下载zlib的tar包并解压,以便支持Nginx的Gzip压缩功能
[root@typecodes nginx-1.9.0]# wget -c http://git.typecodes.com/libs/nginx/zlib-1.2.8.tar.gz
[root@typecodes nginx-1.9.0]# tar -zxf zlib-1.2.8.tar.gz

#######新建Nginx1.9.0安装时所需要的目录
[root@typecodes nginx-1.9.0]# cd /var/tmp/ && mkdir -p /var/tmp/nginx/{client,proxy,fastcgi,uwsgi,scgi}
[root@typecodes tmp]# mkdir -p /var/run/nginx && cd ~/nginx-1.9.0

准备工作做好后,就开始正式配置Nginx-1.9.0的安装明细了。注意,在使用下面这条configure参数配置时,一定要先把反斜杠“\”后面添加的注释文字去掉!!!

./configure \
--prefix=/usr/share/nginx \
--sbin-path=/usr/sbin/nginx \
--conf-path=/etc/nginx/nginx.conf \
--error-log-path=/var/log/nginx/error.log \
--http-log-path=/var/log/nginx/access.log \
--pid-path=/var/run/nginx/nginx.pid  \
--lock-path=/var/lock/nginx.lock \
--user=nginx \
--group=nginx \
--with-http_ssl_module \
--with-http_spdy_module \
--with-http_dav_module \
--with-http_flv_module \
--with-http_realip_module \
--with-http_addition_module \
--with-http_xslt_module \
--with-http_stub_status_module \
--with-http_sub_module \
--with-http_random_index_module \
--with-http_degradation_module \
--with-http_secure_link_module \
--with-http_gzip_static_module \
--with-http_perl_module \
--with-pcre=pcre-8.36 \
--with-zlib=zlib-1.2.8 \
--with-debug \
--with-file-aio \
--with-mail \
--with-mail_ssl_module \
--http-client-body-temp-path=/var/tmp/nginx/client_body \
--http-proxy-temp-path=/var/tmp/nginx/proxy \
--http-fastcgi-temp-path=/var/tmp/nginx/fastcgi \
--http-uwsgi-temp-path=/var/tmp/nginx/uwsgi \
--http-scgi-temp-path=/var/tmp/nginx/scgi \
--with-stream \
--with-ld-opt="-Wl,-E"

配置过程大概需要5分钟左右,部分截图如下:

2 配置完后,就可以直接编译和安装了

最后,直接使用执行这条命令[root@typecodes nginx-1.9.0]# make && make install进行安装即可。其中,make命令和make install命令的执行结果附图如下:

3 配置Nginx1.9.0,使之正常工作

成功安装Nginx1.9.0后,我们需要进行一些配置,包括开机启动、SSL/HTTPS服务等。其中,Nginx服务控制脚本nginx见文章《Nginx服务启动、停止和重启等操作的SHELL脚本》。

#######上传Nginx服务控制脚本nginx,并赋予执行权限,删除安装包,添加Nginx服务到开机启动
[root@typecodes ~]# mv ~/nginx /etc/init.d/nginx && chmod +x /etc/init.d/nginx
[root@typecodes ~]# rm -rf nginx-1.9.0*
[root@typecodes ~]# chkconfig --add nginx
[root@typecodes ~]# chkconfig nginx on
#######上传ssl文件和Nginx配置文件nginx.conf
[root@typecodes ~]# mkdir -p /etc/nginx/ssl && tar -zxf ~/ssl.tar.gz -C /etc/nginx/ssl
[root@typecodes ~]# cd /etc/nginx/ && tar -zcf etc.nginx.tar.gz ./
[root@typecodes ~]# rm -rf ~/ssl.tar.gz 
[root@typecodes ~]# mv ~/nginx.conf /etc/nginx
mv: overwrite ‘/etc/nginx/nginx.conf’? y

#######测试配置是否正常
root@typecodes ~]# nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful

#######新建Nginx进程日志nginx.pid目录,并启动服务
[root@typecodes ~]# mkdir -p /var/run/nginx/
[root@typecodes ~]# service nginx start
Restarting nginx (via systemctl):  [  OK  ]

最后使用命令[root@typecodes nginx]# nginx -V查看Nginx1.9.0的详细信息。

点赞